Valleyview Cemetery
Monument sizes at a glance
| Lot or section | Memorial | Width | Thickness | Height | Notes |
|---|---|---|---|---|---|
| Full size lot | Upright monument (overall) | up to 30 in | - | up to 44 in | Max height 44 in (111.76 cm) from ground including base; max width 30 in (76 cm) including base. |
| Double lot | Upright monument (overall) | up to 56 in | - | up to 44 in | Max height 44 in (111.76 cm) including base; max width 56 in (142.24 cm) including base. |
| All uprights | Upright monument (headstone / die) | - | at least 6 in | - | Minimum die thickness 6 in (15.24 cm). |
| All uprights | Upright monument (base) | - | - | - | Granite base with at least 3 in (7.62 cm) exposed on all sides of the die; smooth-sawn bottom; no closer than 3 in to the lot side lines. |
| Markers taller than one foot | Upright monument (foundation) | - | at least 4 in | - | Concrete at least 4 in (10.16 cm) deep on a compacted base, with a four inch apron around the monument base; built by the City (or approved granite foundation). |
| Single lot | Flat marker | up to 24 in | 3 to 4 in | - | Max 18 x 24 in (45.72 x 60.96 cm). Flat markers 3-4 in thick. The by-law does not say which figure is width; the larger figure is taken as width (side to side). Sizes include concrete if poured in wet concrete. |
| Double lot | Flat marker | up to 42 in | 3 to 4 in | - | Max 20 x 42 in (50.8 x 106.68 cm). Flat markers 3-4 in thick. The by-law does not say which figure is width; the larger figure is taken as width (side to side). Sizes include concrete if poured in wet concrete. |
| Cremation lot | Cremation memorial | up to 24 in | 3 to 4 in | - | Max 24 x 18 in (60.96 x 45.72 cm). Flat markers 3-4 in thick. The by-law does not say which figure is width; the larger figure is taken as width (side to side). Sizes include concrete if poured in wet concrete. |
| Corner posts | Memorial | 6 in | - | - | Bronze, stone or concrete, 6 in (15.24 cm) square and at least 6 in deep, set flush. |
Width is side to side, thickness is front to back, height is above the ground.
Ask our assistant about your plot
Monument rules in plain English
- Each full-size lot may have one upright or pillow monument at the head plus three flat markers, or four flat markers with no upright.
- Uprights may be up to 44 in high including base, and 30 in wide (single lot) or 56 in wide (double lot) including base. Dies must be at least 6 in thick.
- Dies must sit on a granite base that shows at least 3 in on all sides. Bases must be at least 3 in from the lot side lines.
- Monuments go at the centre of the head of the lot, with location approved by the Caretaker. Back-to-back placement is not allowed.
- Only family names may go on the back, and both sides may be used only if the adjoining lots are owned.
- Markers over one foot tall need a concrete foundation at least 4 in deep with a 4 in apron. No foundations are built from Nov 15 to about May 15.
- Flat markers must be bronze, granite or marble, 3 to 4 in thick and flush, set by the City. Single lots up to 18 x 24 in, double lots 20 x 42 in, cremation lots 24 x 18 in.
- Delivered monuments may not differ from the work-order base size by more than 1/2 in.
- Flower beds up to 18 in wide are allowed in front of monument bases.
- Always confirm with the cemetery office before ordering.
Read the full bylaws (on the cemetery's website)
Bylaws can change and some are read automatically. Always confirm sizes with the cemetery office before ordering. Monaco Monuments checks your cemetery's rules for you as part of every order.
Ready to start? Fill out our free intake form (no cost or obligation) or call us at (905) 392-0778. Fill out the intake form