Tiverton Cemetery
Monument sizes at a glance
| Lot or section | Memorial | Width | Thickness | Height | Notes |
|---|---|---|---|---|---|
| All cemeteries | Upright monument (overall) | - | - | up to 47.2 in | Bylaw says 120 centimetres from ground level to the top. No monument may cover more than 10% of the grave area. Text is from a council agenda copy of the 2020 by-law (by-law number left blank). |
| All cemeteries (bronze marker base) | Flat marker (base) | - | 3.5 to 5.1 in | - | Marker fastened with 4+ fasteners to a concrete, granite or stone base or slab 9 to 13 centimetres thick, showing a uniform 6 cm (2.4 in) border. Text is from a council agenda copy of the 2020 by-law (by-law number left blank). |
| Columbarium niche | Cremation memorial (plaque) | 12 to 14 in | - | 12 to 14 in | Granite niche plates 12 x 12 inches and 14 x 14 inches. Text is from a council agenda copy of the 2020 by-law (by-law number left blank). |
| Tiverton new section | Flat marker | up to 23.6 in | - | - | Bylaw says 60 centimetres by 30 centimetres on the surface. Text is from a council agenda copy of the 2020 by-law (by-law number left blank). |
| Tiverton new section, family block of four graves (A-D) | Upright monument (overall) | up to 47.2 in | - | up to 47.2 in | One family monument centred in the block, up to 120 centimetres wide or high. Text is from a council agenda copy of the 2020 by-law (by-law number left blank). |
| Tiverton new section, single burial lot | Bevel marker | up to 23.6 in | - | 1 to 3.1 in | No more than 8 cm high at the back and at least 2.5 cm at the front; total size including base not over 46 cm by 60 cm (18.1 x 23.6 in). Text is from a council agenda copy of the 2020 by-law (by-law number left blank). |
| Tiverton new section | Upright monument (base) | up to 23.6 in | - | - | Base no more than 60 centimetres wide. Text is from a council agenda copy of the 2020 by-law (by-law number left blank). |
| Tiverton new section | Upright monument (foundation) | - | - | - | At least 1.5 metres (59.1 in) deep; excavation inspected before placement. Text is from a council agenda copy of the 2020 by-law (by-law number left blank). |
Width is side to side, thickness is front to back, height is above the ground.
Ask our assistant about your plot
Monument rules in plain English
- Monuments must be granite or marble, free of visible defects, with bases level on the bottom. The Superintendent approves base size and placement.
- No monument may be over 120 cm (about 47 in) high from the ground, or cover more than 10% of the grave area.
- Only the surname may be inscribed on the back of a monument, unless the same family holds the lot behind.
- Slabs and markers must lie flat and level with the sod. Bronze markers need 4 or more fasteners to a base or slab 9 to 13 cm thick, with a 6 cm border.
- Granite columbarium niche plates are 12 x 12 in or 14 x 14 in, with inscriptions approved by the Superintendent.
- All charges must be paid before a monument or marker goes up. Removing, inscribing or cleaning a monument needs written permission.
- Benches, birdbaths and sundials need Superintendent approval and become municipal property.
- New section: foundations at least 1.5 m deep, built by municipal staff or approved contractors and inspected first.
- New section: monuments face the paths in the monument row. A four-grave family block may have one monument up to 120 cm wide or high. Bases may be up to 60 cm wide.
- Markers up to 60 x 30 cm, level with grade. Single-lot slant markers may be 8 cm high at the back and 2.5 cm at the front, up to 46 x 60 cm including the base.
- Always confirm with the cemetery office before ordering.
Read the full bylaws (on the cemetery's website)
Bylaws can change and some are read automatically. Always confirm sizes with the cemetery office before ordering. Monaco Monuments checks your cemetery's rules for you as part of every order.
Ready to start? Fill out our free intake form (no cost or obligation) or call us at (905) 392-0778. Fill out the intake form