Cemetery Bylaws October 30, 2026

All cemeteries

Second Line Nottawasaga Cemetery

Clearview (2279 County Road 42), Simcoe County · Township of Clearview · Bylaws dated 2025-05-12

Monument sizes at a glance

Lot or sectionMemorialWidthThicknessHeightNotes
Single LotUpright monument (overall)up to 24 in-up to 38 inIncluding an 8" (20.32 cm) base. Base 30" (76.2 cm) max x 12" (30.48 cm) min.
Single LotUpright monument (base)up to 30 inat least 12 in-Base 30" max (side to side) x 12" min (front to back assumed).
Double PlotUpright monument (overall)up to 48 in-up to 48 inHeight 48" (121.92 cm), width 48". Base 54" (137.16 cm) max x 12" min.
Double PlotUpright monument (base)up to 54 inat least 12 in-
Triple Plot or greaterUpright monument (overall)up to 72 in-up to 58 inHeight 58" (147.32 cm), width 72" (182.88 cm); base 80" (203.2 cm) max x 12" min.
All lotsUpright monument (headstone / die)-at least 6 in-The size table says "Thickness of die 6" maximum", which conflicts with this minimum; treated as a minimum.
All lotsUpright monument (base)--at least 8 in8" base with at least 4" rocked finish from ground level; 3" border around the die.
Single lotFlat markerup to 24 inat least 4 in-24" x 18" (60.96 x 45.72 cm); 24 in assumed across.
Double lotFlat markerup to 42 inat least 4 in-
Triple lot or greaterFlat markerup to 60 inat least 4 in-
Lot with a monument or marker (foot marker)Flat markerup to 12 in--12" x 6" (the bylaw prints 30.45 cm; 12 in is 30.48 cm). One per lot, centred at the foot.
All lotsFlat marker-at least 4 in-

Width is side to side, thickness is front to back, height is above the ground.

Ask our assistant about your plot

Monument rules in plain English

  • The Township of Clearview runs its municipal cemeteries under Cemetery By-law 24-01, with Schedules A and B replaced by By-law 25-33 (passed May 12, 2025).
  • Design plans (dimensions, material, construction and location) must be approved first; only one monument per lot, of granite or bronze, in designated areas.
  • Dies at least 6 in thick and able to withstand 200 lb of sideways force. Every monument has an 8 in base with at least 4 in of rocked finish and a 3 in border around the die.
  • Single lot: max 38 in tall and 24 in wide including base; base up to 30 in long and at least 12 in deep.
  • Double plot: max 48 in tall and 48 in wide; base up to 54 in. Triple plot or more: max 58 in tall and 72 in wide; base up to 80 in.
  • Only the surname and a design may go on the back of a monument facing another lot, unless the Township consents or you own the lot it faces.
  • Flat markers at least 4 in thick: one per lot, up to 24 x 18 in (single), 42 x 18 in (double) or 60 x 18 in (triple or more). Markers over 20 x 16 in may need to be set in concrete.
  • A 12 x 6 in foot marker is allowed on a lot that already has a monument or marker.
  • Pillow markers that are not level with the ground are not permitted. Marker-only areas need written permission for a monument.
  • Cremation in-ground lots: one flat granite marker, supplied and installed by the Township.
  • No monument may be delivered until the foundation is complete.
  • Always confirm with the cemetery office before ordering.

Read the full bylaws (on the cemetery's website)

Bylaws can change and some are read automatically. Always confirm sizes with the cemetery office before ordering. Monaco Monuments checks your cemetery's rules for you as part of every order.

Ready to start? Fill out our free intake form (no cost or obligation) or call us at (905) 392-0778. Fill out the intake form

Scroll to Top