Rockwood Cemetery
Monument sizes at a glance
| Lot or section | Memorial | Width | Thickness | Height | Notes |
|---|---|---|---|---|---|
| One, two or more adult spaces | Flat marker | 20 to 30 in | 3.5 to 4.5 in | - | Minimum 12 x 20 in (0.31 x 0.51 m), maximum 14 x 30 in (0.36 x 0.77 m); 12-14 in head-to-foot. Uniform 4 in thickness plus or minus 1/2 in. |
| Cremation section | Cremation memorial | 20 in | 3.5 to 4.5 in | - | Only a 12 x 20 in (0.31 x 0.51 m) marker; 12 in head-to-foot. |
| Subdivided infant/youth graves | Flat marker | 20 in | 3.5 to 4.5 in | - | One 12 x 20 in marker per subdivided space; 12 in head-to-foot. |
| All flush markers | Flat marker | - | 3.5 to 4.5 in | - | 4 in plus or minus 1/2 in; length and width tolerance plus or minus 1/2 in. |
| All upright monuments | Upright monument (foundation) | - | - | at least 48 in | Equal to the base measurements; built by municipal employees or authorized personnel. |
| All upright monuments | Upright monument (base) | - | up to 18 in | at least 8 in | All vertical sides rock pitch. |
| Single Adult | Upright monument (headstone / die) | - | 8 to 10 in | - | Thickness excludes base. Maximum width 30 in (76 cm) and maximum height 44 in (97 cm), base included. |
| Single Adult | Upright monument (overall) | up to 30 in | - | up to 44 in | |
| Double Adult | Upright monument (headstone / die) | - | 8 to 10 in | - | Maximum width 48 in (1.37 m) and maximum height 44 in, base included. |
| Double Adult | Upright monument (overall) | up to 48 in | - | up to 44 in | |
| Triple Adult | Upright monument (headstone / die) | - | 8 to 10 in | - | Maximum width given as 1.68 m (78 in) - the metric and inch figures disagree (1.68 m = 66 in), so width is left null. Max height 44 in. |
| Triple Adult | Upright monument (overall) | - | - | up to 44 in | Width given as 1.68 m (78 in); figures disagree, so not recorded. |
Width is side to side, thickness is front to back, height is above the ground.
Ask our assistant about your plot
Monument rules in plain English
- Rules apply to Rockwood Cemetery (501 Main St. S, Rockwood), owned by the Township of Guelph/Eramosa.
- All memorials must be made entirely of granite, with no other material placed on them. Granite fieldstones are not allowed unless cut to spec.
- Flush markers are centred at the head of the grave. Over one or more adult graves they can be 12 x 20 in up to 14 x 30 in. Cremation graves and subdivided infant or youth graves get one 12 x 20 in marker.
- Flush markers are 4 in thick (plus or minus 1/2 in), set level with the ground, with 1/2 in tolerance on length and width. Corner posts are not allowed.
- Uprights go at the centre of the head of the lot, with only one per grave. They must withstand 35 kg of force when set dry, and stainless dowels may be used.
- Upright size by lot: single adult up to 30 in wide, double up to 48 in, triple up to 78 in (the metric figure is 1.68 m). The height limit is 44 in including the base, and dies are 8 to 10 in thick, not counting the base.
- Bases: at least 8 in high, no more than 18 in deep, with rock-pitched vertical sides.
- Foundations are built by the Township to the base size, at least 48 in deep. They are poured about twice a year (June and September), and request forms are due a week before.
- Family names and verses may go on the back with approval. Burial details on the back are allowed only if you hold the rights on both sides.
- Photos must be non-breakable and are allowed on uprights only.
- Dealer tags: at most 3 x 1 in, at the left rear bottom edge between die and base, uprights only.
- Flower beds no more than 12 in deep and no wider than the monument.
- Always confirm with the cemetery office before ordering.
Read the full bylaws (on the cemetery's website)
Bylaws can change and some are read automatically. Always confirm sizes with the cemetery office before ordering. Monaco Monuments checks your cemetery's rules for you as part of every order.
Ready to start? Fill out our free intake form (no cost or obligation) or call us at (905) 392-0778. Fill out the intake form