Mount Hope Cemetery (Brantford)
Monument sizes at a glance
| Lot or section | Memorial | Width | Thickness | Height | Notes |
|---|---|---|---|---|---|
| All markers (all cemeteries) | Flat marker | up to 20 in | 3 to 4 in | - | No larger than 12 x 20 in (304 x 508 mm); 3-4 in (76-102 mm) thick. 12 in taken as head-to-foot. |
| Foot markers (upright sections, lot with monument) | Flat marker | up to 20 in | 3 to 4 in | - | No larger than 12 x 20 in (304 x 508 mm); 3-4 in thick. |
| Infant lots (20 x 48 in) | Flat marker | 12 in | - | - | Marker size 6 x 12 in (152 x 304 mm); 6 in taken as head-to-foot. |
| At-Need cremation lots (20 x 48 in) | Flat marker | 12 in | - | - | Marker size 10 x 12 in (254 x 304 mm); 10 in taken as head-to-foot. |
| Preferred cremation lots (24 x 48 in) | Flat marker | 20 in | - | - | Marker size 12 x 20 in (304 x 508 mm). |
| Adult lots and youth lots; Section CE veterans (Mount Hope) | Flat marker | 20 in | - | - | Marker size 12 x 20 in (304 x 508 mm). Standard grey military design preferred. |
| Bevelled monument with rock-face back | Bevel marker (headstone / die) | - | at least 6 in | up to 20 in | Die no more than 20 in (508 mm) high and at least 6 in (152 mm) thick at the bottom. |
| Mount Hope, Greenwood and Oakhill - monument 5 in thick or less | Upright monument (overall) | - | up to 5 in | up to 36 in | 5 in (127 mm, shown as 'Sin.' in the scanned text) or less thick: max 36 in (915 mm) high including base. |
| Mount Hope, Greenwood and Oakhill - monument over 5 in up to 6 in thick | Upright monument (overall) | - | 5 to 6 in | up to 42 in | Max 42 in (1067 mm) high including base. |
| Mount Hope, Greenwood and Oakhill - monument over 6 in up to 7 in thick | Upright monument (overall) | - | 6 to 7 in | up to 48 in | Max 48 in (1219 mm) high including base. |
| Mount Hope and Greenwood - plot of two lots | Upright monument (overall) | up to 48 in | - | - | 1219 mm. |
| Mount Hope and Greenwood - plot of three lots | Upright monument (overall) | up to 72 in | - | - | 1829 mm. Over three lots, wider designs need written approval. |
| Mount Hope, Greenwood and Oakhill - any monument over 12 in high | Upright monument (foundation) | - | - | at least 48 in | Needs a base of uniform thickness and a foundation 48 in (1,220 mm) below grade. |
| Oakhill - upright cremation lot (24 x 48 in) | Cremation memorial (base) | 18 in | 12 in | 8 in | Base 18 in wide x 12 in deep x 8 in thick (457 x 305 x 203 mm). Set back to back on a strip foundation. |
| Oakhill - upright cremation lot (24 x 48 in) | Cremation memorial (headstone / die) | 16 in | 8 in | 16 in | Die 16 x 16 in (406 mm), 8 in (203 mm) thick at the base, face bevelled to 3 in (76 mm) at the top. |
| Oakhill - single lot | Upright monument (base) | up to 30 in | up to 13 in | - | 762 x 330 mm. |
| Oakhill - double lot | Upright monument (base) | up to 56 in | up to 13 in | - | 1422 x 330 mm. |
| Oakhill - triple lot | Upright monument (base) | up to 56 in | up to 13 in | - | 1422 x 330 mm (same as double lot in the bylaw). |
Width is side to side, thickness is front to back, height is above the ground.
Ask our assistant about your plot
Monument rules in plain English
- Rules apply to the City of Brantford's Mount Hope, Greenwood, Oakhill, Tranquility and Batson cemeteries (no new lots are sold at Greenwood, Tranquility or Batson).
- A marker placement agreement signed by the lot owner and approved by the Supervisor of Cemeteries is needed before any work starts on a monument, marker or plaque.
- All markers and monuments must be granite. Standard bronze plaques are used only in the Mount Hope and Oakhill columbaria.
- Monuments and markers go at the centre and head of the lot. Foot markers are allowed in upright sections on lots that already have a monument, with prior approval.
- Mount Hope and Greenwood: single lots and cremation lots may have flat markers only.
- Flat and foot markers: no larger than 12 x 20 in, uniform thickness 3 to 4 in. Infant lots 6 x 12 in; at-need cremation lots 10 x 12 in; preferred cremation, adult, youth and Mount Hope veterans (Section CE) lots 12 x 20 in. A standard grey military style is preferred.
- Markers are set flush by City staff for a fee; delivery cut-off in the fall is set by the Supervisor. Corner markers and surface attachments are not allowed.
- Photographs are not allowed on any memorial.
- Upright height depends on thickness: up to 5 in thick, max 36 in high; 5 to 6 in thick, max 42 in; 6 to 7 in thick, max 48 in (base included).
- Any monument over 12 in high needs a uniform base and a foundation 48 in below grade.
- Mount Hope and Greenwood: monument width up to 48 in for two lots and 72 in for three lots; wider designs on larger plots need written approval.
- Oakhill: bases up to 30 x 13 in for single lots and 56 x 13 in for double and triple lots. Oakhill upright cremation lots use a set design: base 18 x 12 x 8 in and a 16 x 16 in die, 8 in thick, bevelled to 3 in at the top, set back to back.
- Rock-face backs are only allowed on bevelled monuments with a die no more than 20 in high and at least 6 in thick at the bottom.
- Mount Hope and Greenwood: no names on the back of a monument unless the plot behind has the same owner (approved crests excepted). Oakhill: no inscriptions on the back of monuments that back onto another.
- Inscriptions in a language other than English need a translation approved before work starts.
- Flowerbeds on upright lots may be no wider than the monument and no more than 12 in out from its front. Shrubs only at Mount Hope and Greenwood.
- Always confirm with the cemetery office before ordering.
Read the full bylaws (on the cemetery's website)
Bylaws can change and some are read automatically. Always confirm sizes with the cemetery office before ordering. Monaco Monuments checks your cemetery's rules for you as part of every order.
Ready to start? Fill out our free intake form (no cost or obligation) or call us at (905) 392-0778. Fill out the intake form