Cemetery Bylaws October 30, 2026

All cemeteries

Lakeview Cemetery & Crematorium

Sarnia, Lambton County · Sarnia Cemetery Company · Bylaws dated 2012-06

Monument sizes at a glance

Lot or sectionMemorialWidthThicknessHeightNotes
Single lotFlat markerup to 24 in--Bylaw says 0.305 x 0.61 meters (12 inches x 24 inches) face area; 12 in is the head-to-foot length. An extra 2 in granite or concrete border is allowed.
Two or more adjoining lotsFlat markerup to 36 in--Bylaw says 0.33 x 0.92 meters (13 inches x 36 inches); 13 in is the head-to-foot length.
Section D (Infant and Children Section)Flat markerup to 20 in--Bylaw says 0.305 x 0.507 meters (12 inches x 20 inches); flat granite or bronze only.
Single lotUpright monument (headstone / die)up to 24 in6 to 8 inup to 48 inExcluding the base. Bylaw says height 1.22 m (4.0 feet), width 0.61 m (2.0 feet), die thickness 0.152 to 0.203 m (6 to 8 inches).
Two adjoining lotsUpright monument (headstone / die)up to 48 in6 to 8 inup to 48 inExcluding the base. Bylaw says height 1.22 m (4.0 feet), width 1.22 m (4.0 feet), die 6 to 8 inches.
Three adjoining lotsUpright monument (headstone / die)up to 72 inat least 8 inup to 48 inExcluding the base. Bylaw says height 1.22 m (4.0 feet), width 1.83 m (6.0 feet), die minimum 0.203 m (8.0 inches).
Four adjoining lotsUpright monument (headstone / die)up to 96 inat least 8 inup to 48 inExcluding the base. Bylaw says height 1.22 m (4.0 feet), width 2.44 m (8.0 feet), die minimum 0.203 m (8.0 inches).
All upright markersUpright monument (base)-up to 14 inat least 8 inBylaw says max 14" thick, min height 0.203 m (8.0 inches), border of 0.08 m (3.0 inches) around the die, no closer than 0.08 m to lot side lines; same material as the die.
Corner markersMemorialup to 6 in--Bylaw says 0.153 meters (0.5 feet) square, bronze or granite, flush; installed by the Company.

Width is side to side, thickness is front to back, height is above the ground.

Ask our assistant about your plot

Monument rules in plain English

  • Some sections allow flat headstone markers only. Other sections allow flat or upright markers.
  • Only one flat or upright headstone per single lot, centred at the head end. A marker centred across two lots counts for both.
  • A flat foot marker or two corner markers may go at the foot of a full-size grave, but not on infant or cremation plots.
  • Markers must be granite or bronze, cut level and true, with dies finished on all sides.
  • Flat markers: up to 12 x 24 in on a single lot, or 13 x 36 in on two or more lots, plus an optional 2 in border. The cemetery installs all markers for a setting fee.
  • Section D (infants and children) allows flat granite or bronze markers only, up to 12 x 20 in. Section Q allows bronze flat markers only.
  • Upright dies may be up to 4 ft high (base not included). Width: 2 ft on one lot, 4 ft on two, 6 ft on three, 8 ft on four. Thickness is 6 to 8 in on one or two lots, and at least 8 in on three or four.
  • Bases must match the die material, be at least 8 in high and no more than 14 in thick, show a 3 in border around the die, and stay clear of the lot side lines.
  • The cemetery builds concrete foundations for all upright markers, at your cost and to the exact size of the base.
  • No foundations are built, and no flat markers are received, between October 31 and May 15.
  • Monument dealers must file a Request for Installation form with the lot holder's details before work begins.
  • Bronze or granite corner stones (6 in square) must be installed by cemetery staff.
  • Memorial saddles may be attached to markers year-round. Wreaths on stands are allowed from November 15 to April 15.
  • Always confirm with the cemetery office before ordering.

Read the full bylaws (on the cemetery's website)

Bylaws can change and some are read automatically. Always confirm sizes with the cemetery office before ordering. Monaco Monuments checks your cemetery's rules for you as part of every order.

Ready to start? Fill out our free intake form (no cost or obligation) or call us at (905) 392-0778. Fill out the intake form

Scroll to Top