Holy Sepulchre Cemetery
Monument sizes at a glance
| Lot or section | Memorial | Width | Thickness | Height | Notes |
|---|---|---|---|---|---|
| Single grave | Upright monument (overall) | up to 32 in | at least 6 in | up to 54 in | Max total height 54 in (1.4 m); max base and monument length 32 in (0.8 m); base up to 3 in wider than the marker base. Minimum thickness 6 in up to 42 in high, 8 in above that. Schedule D (By-law 2021-217), read from the page image. |
| Double grave | Upright monument (overall) | up to 63 in | at least 6 in | up to 54 in | Max total height 54 in; max base length and monument length 63 in (1.6 m). Minimum thickness 6 in (0.15 m) for monuments up to 42 in (1.07 m) high, 8 in (0.2 m) over 42 in. Schedule D table (amended by By-law 2021-217); OCR text is column-scrambled, values checked against the page image. |
| Triple grave or higher | Upright monument (overall) | up to 78 in | at least 6 in | up to 54 in | Max total height 54 in; max base length and monument length 78 in (2.0 m). Minimum thickness 6 in (0.15 m) for monuments up to 42 in (1.07 m) high, 8 in (0.2 m) over 42 in. Schedule D table (amended by By-law 2021-217); OCR text is column-scrambled, values checked against the page image. |
| Uprights over 42 in high | Upright monument (headstone / die) | - | at least 8 in | - | Minimum thickness 6 in (0.15 m) for monuments up to 42 in (1.07 m) high, 8 in (0.2 m) over 42 in. Schedule D table (amended by By-law 2021-217); OCR text is column-scrambled, values checked against the page image. |
| Foot markers | Flat marker | - | up to 4 in | - | Flush with ground; max thickness 4 in (0.1 m). Schedule D table (amended by By-law 2021-217); OCR text is column-scrambled, values checked against the page image. |
| Wooden crosses | Memorial (overall) | up to 24 in | 4 to 6 in | up to 36 in | Cedar or pressure-treated wood; max height 36 in (0.9 m), thickness 4-6 in, max width 24 in (0.6 m). Not in flat marker sections or urn gardens. Schedule D table (amended by By-law 2021-217); OCR text is column-scrambled, values checked against the page image. |
| Single grave | Upright monument (foundation) | - | at least 4 in | - | Concrete pad at least 4 in thick. Markers 18 in (46 cm) high or less and wooden crosses do not need concrete bases. |
| Double or triple grave | Upright monument (foundation) | - | at least 5 in | - | Concrete pad at least 5 in thick. |
| Slant markers | Bevel marker (foundation) | - | at least 4 in | - | Slant markers must sit on a 4 in (10 cm) concrete slab. Pillow markers may go on a concrete pad without a poured foundation. |
| Holy Sepulchre Flat Area - single grave | Flat marker | up to 30 in | 4 to 6 in | - | Flush with ground; max length 30 in (0.8 m), max width (head to foot) 20 in (0.5 m); thickness 4-6 in. Schedule D table (amended by By-law 2021-217); OCR text is column-scrambled, values checked against the page image. |
| Holy Sepulchre Flat Area - double grave | Flat marker | up to 39 in | 4 to 6 in | - | Flush; max length 39 in (1.0 m), width (head to foot) 20 in; thickness 4-6 in. Schedule D table (amended by By-law 2021-217); OCR text is column-scrambled, values checked against the page image. |
| Holy Sepulchre Flat Area - triple grave or higher | Flat marker | up to 72 in | 4 to 6 in | - | Flush; max length 72 in (1.82 m), width (head to foot) 20 in; thickness 4-6 in. Schedule D table (amended by By-law 2021-217); OCR text is column-scrambled, values checked against the page image. |
Width is side to side, thickness is front to back, height is above the ground.
Ask our assistant about your plot
Monument rules in plain English
- A monument permit, with drawings and the fee, is needed before any marker is installed, and all lot charges must be paid first. Only approved monument dealers may install.
- Markers must be granite or marble (wooden crosses excepted). Plaques must be part of the marker and made of non-corrosive metal. Statuary counts toward the marker's size.
- Single, double and triple graves: total height up to 54 in, with base and monument length up to 32, 63 and 78 in.
- Minimum thickness is 6 in for uprights up to 42 in tall and 8 in for taller uprights.
- Concrete pads must be at least 4 in thick for single graves and 5 in for double or larger. Markers 18 in high or less need no concrete base. Slant markers need a 4 in concrete slab.
- Each single grave may have one upright plus one pillow marker and four or five flat markers. The upright goes at the centre of the top lot line.
- Wooden crosses (cedar or pressure-treated) are allowed up to 36 in high and 24 in wide, but not in flat marker sections or urn gardens.
- Photographs must be oval and no larger than 3.5 x 2.25 in. No metal plates or photos on flush markers.
- Flower beds are allowed only in front of a marker, up to 16 in wide and no longer than the marker base. No borders, fences or curbs.
- Holy Sepulchre Flat Area markers are flush, 4 to 6 in thick, 20 in head to foot, and up to 30, 39 or 72 in long for single, double or triple graves.
- Always confirm with the cemetery office before ordering.
Read the full bylaws (on the cemetery's website)
Bylaws can change and some are read automatically. Always confirm sizes with the cemetery office before ordering. Monaco Monuments checks your cemetery's rules for you as part of every order.
Ready to start? Fill out our free intake form (no cost or obligation) or call us at (905) 392-0778. Fill out the intake form