Hillcrest Cemetery
Monument sizes at a glance
| Lot or section | Memorial | Width | Thickness | Height | Notes |
|---|---|---|---|---|---|
| All casket lots and plots | Upright monument (overall) | - | - | up to 48 in | Overall max 4 ft (1.22 m). |
| All casket lots and plots | Upright monument (headstone / die) | - | at least 8 in | - | Bylaw says 203 mm. |
| Single casket Lot | Upright monument (base) | - | up to 14 in | at least 6 in | Bylaw calls this 'width'; in context it is the base depth front to back (356 mm). Base must be at least 6 in (152 mm) high. |
| Larger casket plots (2 to 6 lots) | Upright monument (base) | - | up to 18 in | at least 6 in | Bylaw calls this 'width'; in context it is the base depth front to back (457 mm). Base must be at least 6 in high. |
| 10' x 3' 6" Single Lot | Upright monument (overall) | up to 24 in | - | up to 48 in | Monument (base and die) max 24 in long side to side. Size from the by-law's size table, which is an image in the PDF; quote is from our hand transcription of that image. |
| 10' x 7' 2 Lot Plot | Upright monument (overall) | up to 54 in | - | up to 48 in | Monument (base and die) max 54 in long. Size from the by-law's size table, which is an image in the PDF; quote is from our hand transcription of that image. |
| 10' x 10' 6" 3 Lot Plot | Upright monument (overall) | up to 68 in | - | up to 48 in | Monument (base and die) max 68 in long. Size from the by-law's size table, which is an image in the PDF; quote is from our hand transcription of that image. |
| 10' x 14' 4 Lot Plot | Upright monument (overall) | up to 82 in | - | up to 48 in | Monument (base and die) max 82 in long. Size from the by-law's size table, which is an image in the PDF; quote is from our hand transcription of that image. |
| 5 Lot Plot and 6 Lot Plot | Upright monument (overall) | up to 96 in | - | up to 48 in | Monument (base and die) max 96 in long on 5- and 6-lot plots. Size from the by-law's size table, which is an image in the PDF; quote is from our hand transcription of that image. |
| 4' x 4' Cremation | Upright monument (overall) | up to 24 in | - | up to 48 in | Monument max 24 in long on a 4 ft x 4 ft cremation lot. Size from the by-law's size table, which is an image in the PDF; quote is from our hand transcription of that image. |
| Single Lot and 4' x 4' Cremation (pillow marker) | Bevel marker | up to 24 in | - | up to 12 in | Pillow marker max 24 in long x 18 in head to foot; max 12 in (305 mm) high at any point. Size from the by-law's size table, which is an image in the PDF; quote is from our hand transcription of that image. |
| 2 to 6 Lot Plots (pillow marker) | Bevel marker | up to 48 in | - | up to 12 in | Pillow marker max 48 in long x 18 in head to foot; max 12 in high. Size from the by-law's size table, which is an image in the PDF; quote is from our hand transcription of that image. |
| All lots (pillow marker) | Bevel marker | - | - | up to 12 in | Bylaw says 305 mm. |
| All lots (flat marker) | Flat marker | - | 4 to 6 in | - | Stone thickness 4 to 6 in (101 to 152 mm), set flush. |
| Single Lot and 4' x 4' Cremation (flat marker) | Flat marker | up to 24 in | - | - | Flat marker max 24 in long x 18 in head to foot. The final by-law table (image) shows the same 24 x 18 for single lots and 4 ft x 4 ft cremation lots; quote is from the 2019 draft table text. |
| 2 to 6 Lot Casket Plots (flat marker) | Flat marker | up to 48 in | - | - | Flat marker max 48 in long x 18 in head to foot on 2- to 6-lot plots (same in final by-law table image). |
| 2' x 2' Cremation | Cremation memorial | up to 20 in | - | - | Flat marker max 20 in long x 12 in head to foot; no monuments; no marker foundations allowed in this section. |
| Single Lot (foot marker) | Flat marker | up to 24 in | - | - | Max 24 in (610 mm) side to side x 18 in (457 mm) head to foot. |
| Casket lots and plots (cornerstone) | Memorial | up to 6 in | - | - | Cornerstones 6 x 6 in, 2 or 4 per lot or plot. Size from the by-law's size table, which is an image in the PDF; quote is from our hand transcription of that image. |
| Scattering Ground | Memorial (plaque) | up to 6 in | - | up to 2 in | Plaque 6 in x 2 in (152 x 51 mm) on the common stone memorial; no monuments or markers. |
| 3 feet x 3 feet cremation section (South Ranges 1A and 1B) | Cremation memorial | 22 in | - | - | Must be exactly 22 in (559 mm) side to side x 14 in (357 mm) head to foot. A marker foundation is mandatory here. |
Width is side to side, thickness is front to back, height is above the ground.
Ask our assistant about your plot
Monument rules in plain English
- Run by the Town of Halton Hills under By-law 2020-0033, which also covers Greenwood (Georgetown), Fairview (Acton) and Hillcrest (Norval) cemeteries.
- Only one monument or marker is allowed per lot, centred in the set alignment. The Town (Commissioner) must approve the location, design and specifications first, and all lot charges must be paid.
- Upright monuments: max 4 ft (48 in) tall; base at least 6 in high; die at least 8 in thick.
- Monument base depth (front to back): max 14 in on a single casket lot, 18 in on larger plots.
- Max monument length (side to side): single lot 24 in; 2-lot 54 in; 3-lot 68 in; 4-lot 82 in; 5- or 6-lot 96 in; 4 ft x 4 ft cremation lot 24 in.
- Pillow markers: max 24 x 18 in on a single lot or 4 x 4 cremation lot, 48 x 18 in on 2- to 6-lot plots, and never more than 12 in high.
- Flat markers: flush with the ground, 4 to 6 in thick; max 24 x 18 in on a single lot, 48 x 18 in on larger plots, 20 x 12 in in the 2 ft x 2 ft cremation section.
- Hillcrest's 3 ft x 3 ft cremation section (South Ranges 1A and 1B) requires a standard flat marker of exactly 22 x 14 in on a mandatory foundation.
- Foot markers up to 24 x 18 in, and 6 x 6 in cornerstones (2 or 4 per lot), are optional on casket lots.
- Scattering ground: no monuments or markers; one 2 x 6 in plaque per scattering on the stone memorial provided.
- Foundations are poured by the Town four times a year after prepayment; monument foundations at least 5 ft deep. Marker foundations are not allowed in the 2 x 2 cremation section and otherwise optional (max 12 in deep; 4 in for pillow markers).
- Inscriptions on both sides of a monument are allowed if you own both sides of the lot, it does not block a neighbour, or the lots are separated by a path. Engraving on the base needs approval.
- Vases, benches, trees and plaques only through the Town's own program. No pictures or ornaments on niche shutters without approval.
- Temporary markers or crosses are allowed for up to 1 year after burial.
- Always confirm with the cemetery office before ordering.
Read the full bylaws (on the cemetery's website)
Bylaws can change and some are read automatically. Always confirm sizes with the cemetery office before ordering. Monaco Monuments checks your cemetery's rules for you as part of every order.
Ready to start? Fill out our free intake form (no cost or obligation) or call us at (905) 392-0778. Fill out the intake form