Dunedin Union Cemetery
Monument sizes at a glance
| Lot or section | Memorial | Width | Thickness | Height | Notes |
|---|---|---|---|---|---|
| Single Lot | Upright monument (overall) | up to 24 in | - | up to 38 in | Including an 8" (20.32 cm) base. Base 30" (76.2 cm) max x 12" (30.48 cm) min. |
| Single Lot | Upright monument (base) | up to 30 in | at least 12 in | - | Base 30" max (side to side) x 12" min (front to back assumed). |
| Double Plot | Upright monument (overall) | up to 48 in | - | up to 48 in | Height 48" (121.92 cm), width 48". Base 54" (137.16 cm) max x 12" min. |
| Double Plot | Upright monument (base) | up to 54 in | at least 12 in | - | |
| Triple Plot or greater | Upright monument (overall) | up to 72 in | - | up to 58 in | Height 58" (147.32 cm), width 72" (182.88 cm); base 80" (203.2 cm) max x 12" min. |
| All lots | Upright monument (headstone / die) | - | at least 6 in | - | The size table says "Thickness of die 6" maximum", which conflicts with this minimum; treated as a minimum. |
| All lots | Upright monument (base) | - | - | at least 8 in | 8" base with at least 4" rocked finish from ground level; 3" border around the die. |
| Single lot | Flat marker | up to 24 in | at least 4 in | - | 24" x 18" (60.96 x 45.72 cm); 24 in assumed across. |
| Double lot | Flat marker | up to 42 in | at least 4 in | - | |
| Triple lot or greater | Flat marker | up to 60 in | at least 4 in | - | |
| Lot with a monument or marker (foot marker) | Flat marker | up to 12 in | - | - | 12" x 6" (the bylaw prints 30.45 cm; 12 in is 30.48 cm). One per lot, centred at the foot. |
| All lots | Flat marker | - | at least 4 in | - |
Width is side to side, thickness is front to back, height is above the ground.
Ask our assistant about your plot
Monument rules in plain English
- The Township of Clearview runs its municipal cemeteries under Cemetery By-law 24-01, with Schedules A and B replaced by By-law 25-33 (passed May 12, 2025).
- Design plans (dimensions, material, construction and location) must be approved first; only one monument per lot, of granite or bronze, in designated areas.
- Dies at least 6 in thick and able to withstand 200 lb of sideways force. Every monument has an 8 in base with at least 4 in of rocked finish and a 3 in border around the die.
- Single lot: max 38 in tall and 24 in wide including base; base up to 30 in long and at least 12 in deep.
- Double plot: max 48 in tall and 48 in wide; base up to 54 in. Triple plot or more: max 58 in tall and 72 in wide; base up to 80 in.
- Only the surname and a design may go on the back of a monument facing another lot, unless the Township consents or you own the lot it faces.
- Flat markers at least 4 in thick: one per lot, up to 24 x 18 in (single), 42 x 18 in (double) or 60 x 18 in (triple or more). Markers over 20 x 16 in may need to be set in concrete.
- A 12 x 6 in foot marker is allowed on a lot that already has a monument or marker.
- Pillow markers that are not level with the ground are not permitted. Marker-only areas need written permission for a monument.
- Cremation in-ground lots: one flat granite marker, supplied and installed by the Township.
- No monument may be delivered until the foundation is complete.
- Always confirm with the cemetery office before ordering.
Read the full bylaws (on the cemetery's website)
Bylaws can change and some are read automatically. Always confirm sizes with the cemetery office before ordering. Monaco Monuments checks your cemetery's rules for you as part of every order.
Ready to start? Fill out our free intake form (no cost or obligation) or call us at (905) 392-0778. Fill out the intake form