Avondale Cemetery
Monument sizes at a glance
| Lot or section | Memorial | Width | Thickness | Height | Notes |
|---|---|---|---|---|---|
| Two-grave lot | Upright monument (base) | up to 60 in | up to 14 in | - | Every base may cover no more than 10% of the lot area and must be centred at the head of the lot. |
| All lots - flush markers | Flat marker | up to 48 in | at least 4 in | - | Not to exceed 18 x 48 in (18 in taken as head-to-foot). Markers larger than this must be 6 in thick. |
| 6 in thick die stones (option i) | Upright monument (overall) | up to 36 in | 6 in | up to 34 in | 36 in (L) x 34 in (H) x 6 in thick including the base. Part of the page introducing these limits did not extract, so confirm with the City. |
| 6 in thick die stones (option ii) | Upright monument (overall) | up to 42 in | 6 in | up to 20 in | 42 in (L) x 20 in (H) x 6 in thick including the base. Any 6 in die under 2 ft high must be installed to withstand 100 lb of horizontal force. |
| 8 in thick die stones | Upright monument (headstone / die) | - | 8 in | up to 42 in | Maximum height 3 ft 6 in including base. |
| 10 in thick die stones | Upright monument (headstone / die) | - | 10 in | up to 66 in | Height up to 5 ft 6 in including base. |
| 12 in thick die stones | Upright monument (headstone / die) | - | 12 in | up to 90 in | Height up to 7 ft 6 in including base. |
Width is side to side, thickness is front to back, height is above the ground.
Ask our assistant about your plot
Monument rules in plain English
- Rules apply to Avondale Cemetery and any other cemetery owned or run by the City of Stratford.
- No memorial may be placed until all lot charges are paid, and a written order with the memorial's dimensions must reach the Manager's office at least three weeks before installation.
- All monuments and markers must be granite. No stone, metal or other ornaments may be attached to monuments.
- Only one monument per lot, centred at the head of the lot. The base may cover no more than 10% of the lot.
- Two-grave lot: base no more than 60 x 14 in.
- Foundations are concrete, flush with the ground and about the size of the base, built by or for the City (inspection fee applies). Monuments cannot be delivered until the foundation is done.
- Die height depends on thickness: 6 in dies up to 36 x 34 in high or 42 x 20 in high (including base); 8 in dies up to 3 ft 6 in; 10 in dies up to 5 ft 6 in; 12 in dies up to 7 ft 6 in (all including base).
- Every monument must withstand 100 lb of sideways force; dowel pins or similar are allowed.
- Flush markers must be at least 4 in thick and no larger than 18 x 48 in; anything larger must be 6 in thick.
- Markers and footstones may be bronze or granite but must not interfere with future burials.
- Corner posts are only allowed if supplied by the City.
- Niche fronts: only an approved bronze wreath and scroll in the pre-drilled holes; the City does the inscriptions.
- Memorials are not allowed in the scattering garden; names go on the shared plaque (1 x 6 in, 2.25 x 6 in or 3.5 x 6 in plates).
- Flower beds are limited to 18 in in front of the lot, and none on flat-marker lots. One shrub may flank each side of an upright monument with approval.
- Monument dealers must lay wooden planks on lots while working.
- Always confirm with the cemetery office before ordering.
Read the full bylaws (on the cemetery's website)
Bylaws can change and some are read automatically. Always confirm sizes with the cemetery office before ordering. Monaco Monuments checks your cemetery's rules for you as part of every order.
Ready to start? Fill out our free intake form (no cost or obligation) or call us at (905) 392-0778. Fill out the intake form